🔥 DTF Transfer – Application Instructions

🌡️ Heat Press Settings:

• Temperature: 325°F (163°C).
  
• Pressure: Medium pressure recommended.
  

👕 Garment Preparation:

• Pre-press garment for 5–10 seconds to remove moisture and wrinkles.
  

🔥 Heat Application:

• Place the DTF transfer onto the garment with the design facing up.
  
• Press for 15 seconds using medium pressure.
  

🧊 Peeling:

• Allow the transfer film to cool completely before peeling.
  
• Peel the film low and slow; do not peel straight up toward the ceiling.
  
• Peel carefully and slowly to ensure the design remains adhered to the garment.
  

🧻 Final Press:

• Cover the design with a cotton cloth (an old t-shirt works well).
  
• Press again for 5–10 seconds to finish the application.
  

🧼 Care Instructions:

• Wash garments inside out using cold water.
  
• Tumble dry on low heat.
  
• Avoid high heat and do not iron directly on the design.
  
• Remove garments from the dryer promptly and hang or fold.
  
• DTF prints will soften with each wash and, when cared for properly, can outlast the garment.