✨ Siser Glitter HTV – Application Instructions

👕 Compatible Fabrics:

• 100% Cotton.
  
• Poly/cotton blends.
  
• 100% Polyester.
  
• Leather.
  

🔥 Heat Press Application:

• Preheat garment for 2–3 seconds to remove moisture and wrinkles.
  
• Apply design at 320°F (160°C).
  
• EasyPress users should increase temperature by approximately 30°F.
  
• Press with medium pressure for 10–15 seconds.
  
• Peel carrier warm.
  

🧺 Home Iron Application:

• Set iron dial between Cotton and Linen settings.
  
• Cover design with a heat transfer cover sheet or multipurpose paper.
  
• Place garment on a flat, hard surface (ironing board not recommended).
  
• Press iron with medium to firm pressure for 10–15 seconds.
  
• Peel carrier warm.
  

🧼 Laundering Instructions:

• Wait 24 hours before the first wash.
  
• Machine wash warm or cold using mild detergent.
  
• Wash garments inside out for best results.
  
• Do not bleach, dry clean, or use liquid fabric softener.
  
• Dry on a low dryer setting.
  

✂️ Siser Glitter HTV – Cutter Settings (Cricut, Silhouette, Brother)

Always perform a small test cut before your full design.

• 💻 Cricut Explore / Maker: Fine-Point / AutoBlade | Setting: Glitter Iron-On
  
• 🖥️ Silhouette 4 / 5: AutoBlade 4 | Material: Heat Transfer Glitter | Force 11–14 | Speed 8
  
• 🖨️ Brother ScanNCut DX: AutoBlade | Cut Speed 5 | Half Cut 4
  

✅ Tip: Glitter HTV has a thicker, textured surface—blade sharpness and test cuts are crucial for clean, complete cuts.