🌿 Siser EasyWeed® EcoStretch™ – Application Instructions

👕 Compatible Fabrics:

• 100% Cotton.
  
• Poly/cotton blends.
  
• 100% Polyester.
  
• Lycra® / Spandex.
  

🔥 Heat Press Application:

• Preheat garment for 2–3 seconds to remove moisture and wrinkles.
  
• Apply design at 250°F (120°C).
  
• EasyPress® users should increase temperature by approximately 30°F.
  
• Press with medium pressure for 10–15 seconds.
  
• Peel carrier hot.
  

🧺 Home Iron Application:

• Set iron dial on Cotton.
  
• Cover the design with a heat transfer cover sheet or multipurpose paper.
  
• Place garment on a flat, hard surface (ironing board not recommended).
  
• Press iron with medium pressure for 10–15 seconds.
  
• Peel carrier hot.
  

🧼 Laundering Instructions:

• Wait 24 hours before the first wash.
  
• Machine wash cold with mild detergent.
  
• Wash garments inside out for best results.
  
• Do not bleach, dry clean, or use liquid fabric softener.
  
• Dry on a low dryer setting.
  

✂️ Siser EasyWeed EcoStretch Cutter Settings

Get clean, precise cuts with Siser EasyWeed EcoStretch heat transfer vinyl. Always do a test cut to ensure the best results. 🚀

🎯 Recommended Machine Settings

• 🖨️ Cricut Explore Air / Cricut Maker: AutoBlade, Setting: Vinyl+ / Heat Transfer / Everyday Iron-On
• ✂️ Silhouette 4 & 5: AutoBlade Level 3, Material: Heat Transfer Smooth, Force: 6, Speed: 8
• 🧩 Brother ScanNCut DX: AutoBlade, Cut Speed: 5, Half-Cut: Auto

💡 Tips for Best Cutting

• 🔪 Use a sharp blade for clean kiss cuts.
• 🐢 Slow down speed for intricate or small designs.
• ⚖️ Adjust force slightly if cutting through the carrier or not cutting fully.
• ✅ Always test cut before full production.

Following these settings ensures easy weeding and professional results every time. 🎨