🖌️ Siser EasyPSV – Application Instructions

✂️ Cutting & Weeding:

• Place EasyPSV with the liner side down and cut your design.
  
• Do not mirror or reverse your design when cutting.
  
• Weed excess vinyl from around the design.
  

📄 Apply Application Tape:

• Remove the paper liner from the application tape.
  
• Place the tape over the EasyPSV design.
  
• Burnish firmly with a squeegee to adhere the vinyl to the tape.
  

🎯 Transfer the Design:

• Lift the application tape and EasyPSV away from the paper liner to expose the adhesive.
  
• Position the taped design onto the desired surface.
  

✋ Final Application:

• Burnish the design with a squeegee to fully adhere it to the surface.
  
• Slowly peel away the application tape, leaving the EasyPSV design on the object.
  

⚠️ Care Notes:

• EasyPSV is designed for hard surfaces such as glass, wood, plastic, metal, and ceramic.
  
• Not recommended for use near flame or heat sources.
  
• Not microwave or dishwasher safe.
  

✅ Tip: Use firm, even pressure with a squeegee when applying the design to prevent bubbles and ensure proper adhesion.

✂️ Siser EasyPSV® Brushed – Cutter Settings (Cricut, Silhouette, Brother)

Always perform a small test cut before your full design.

• 💻 Cricut Explore / Maker: AutoBlade | Setting: Vinyl
  
• 🖥️ Silhouette 4 / 5: AutoBlade | Setting: Premium Vinyl‑Permanent Glossy | Force 6‑7 | Speed 8
  
• 🖨️ Brother ScanNCut DX: AutoBlade | Standard, 3 | Cut Speed: 1 | Cut Pressure: 2
  

✅ Tip: Blade condition, mat grip, and material thickness can affect the cut. If the cut doesn’t go all the way through or cuts too deep, adjust blade depth or force slightly and test again.