🖌️ Siser EasyPSV – Application Instructions

✂️ Cutting & Weeding:

• Place EasyPSV with the liner side down and cut your design.
  
• Do not mirror or reverse your design when cutting.
  
• Weed excess vinyl from around the design.
  

📄 Apply Application Tape:

• Remove the paper liner from the application tape.
  
• Place the tape over the EasyPSV design.
  
• Burnish firmly with a squeegee to adhere the vinyl to the tape.
  

🎯 Transfer the Design:

• Lift the application tape and EasyPSV away from the paper liner to expose the adhesive.
  
• Position the taped design onto the desired surface.
  

✋ Final Application:

• Burnish the design with a squeegee to fully adhere it to the surface.
  
• Slowly peel away the application tape, leaving the EasyPSV design on the object.
  

⚠️ Care Notes:

• EasyPSV is designed for hard surfaces such as glass, wood, plastic, metal, and ceramic.
  
• Not recommended for use near flame or heat sources.
  
• Not microwave or dishwasher safe.
  

✅ Tip: Use firm, even pressure with a squeegee when applying the design to prevent bubbles and ensure proper adhesion.

✂️ Siser EasyPSV® Starling – Cutter Settings (Cricut, Silhouette, Brother)

Always perform a small test cut before your full design.

• 💻 Cricut Explore / Maker: AutoBlade | Setting: Vinyl / Light Cardstock (Smart Vinyl on Maker)
  
• 🖥️ Silhouette 4 / 5: AutoBlade 3 | Material: Vinyl / Vinyl Glossy | Force 8 | Speed 7–8
  
• 🖨️ Brother ScanNCut DX: AutoBlade | Blade Setting: Standard, 3 | Cut Speed: 1 | Cut Pressure: 1–2
  

✅ Tip: EasyPSV® Starling performs best with standard permanent vinyl cutter settings. Always test cut first and adjust blade depth or pressure as needed for clean, complete cuts. ([turn0search0])