🖌️ Siser EasyPSV – Application Instructions

✂️ Cutting & Weeding:

• Place EasyPSV with the liner side down and cut your design.
  
• Do not mirror or reverse your design when cutting.
  
• Weed excess vinyl from around the design.
  

📄 Apply Application Tape:

• Remove the paper liner from the application tape.
  
• Place the tape over the EasyPSV design.
  
• Burnish firmly with a squeegee to adhere the vinyl to the tape.
  

🎯 Transfer the Design:

• Lift the application tape and EasyPSV away from the paper liner to expose the adhesive.
  
• Position the taped design onto the desired surface.
  

✋ Final Application:

• Burnish the design with a squeegee to fully adhere it to the surface.
  
• Slowly peel away the application tape, leaving the EasyPSV design on the object.
  

⚠️ Care Notes:

• EasyPSV is designed for hard surfaces such as glass, wood, plastic, metal, and ceramic.
  
• Not recommended for use near flame or heat sources.
  
• Not microwave or dishwasher safe.
  

✅ Tip: Use firm, even pressure with a squeegee when applying the design to prevent bubbles and ensure proper adhesion.

✨ Siser EasyPSV Glitter Cutter Settings

Cut your Siser EasyPSV Glitter vinyl with confidence using these suggested machine settings. Always perform a test cut first to dial in the perfect cut for your blade and machine. 🎨

🎯 Recommended Machine Settings

• 🖨️ Cricut Explore Air / Cricut Maker: AutoBlade, Setting: Vinyl (permanent adhesive)
• ✂️ Silhouette Cameo (4 & 5): AutoBlade, Material: Vinyl Glossy, Force: 8, Speed: 7
• 🧩 Brother ScanNCut DX: Standard Blade, Cut Speed: 1, Cut Pressure: 1

💡 Cutting Tips

• 📏 Load the vinyl liner side down (vinyl facing up); do NOT mirror your design — it's adhesive vinyl, not heat‑transfer. :contentReference[oaicite:1]{index=1}
• 🔪 Use a fresh blade for clean, accurate cuts.
• 🐢 Slow down speed and force for smaller or detailed designs.
• ⚖️ If the cut doesn’t go all the way through, slightly increase pressure/force and retry.
• ✅ Always do a small test cut before full production. :contentReference[oaicite:2]{index=2}

Using these settings helps ensure clean weeding and crisp cuts for stickers, decals, and decorative glitter vinyl projects! ✂️✨